In-situ Flow Cell for Low-Flow System with RDO Sensor (pur Manuel d'utilisateur télécharger pdf

Information Sheet

Multi-Parameter

Water Quality

TROLL

(over)

RDO

FLOW CELL

Catalog No. 0057600

APPLICATION

Designed for use during low-flow sampling and well purging to route flow past

the water quality sensors of the Multi-Parameter TROLL

9500, including the

RDO

optical dissolved oxygen sensor. Seal between instrument and flow cell

prevents oxygenation of water prior to analysis. Clear material permits visual

inspection. Stabilizing ground stake (included) threads into base. 3-way intake

valve (included) may be used to divert flow for sample collection. Anti-siphon

check valve (included) prevents backflow at outlet. Accommodates

/8” and ½”

tubing (tubing not included). Optional base plate is available.

PHYSICAL DESCRIPTION

Dimensions 8.8 cm (3.5 in) O.D., 21.6 cm (8.5 in) long

Volume 675 mL without sensors

Material Clear acrylic

Ground spike 316L stainless steel

NPT attachment

/8” NPT

Tubing sizes accepted

/8”, ½”

Typical flow rate 0.1 - 0.5 liters/minute

Recommended Flow rate: 8.0 liters/minute

operational limits Pressure: 10 psi

CONTENTS

The flow cell kit includes:

• flow cell body with removable top (RDO adapter plate) and base

• ground spike

• check valves (1 ea.

/8” and ½”), optional

• 3-way ball valves (1 ea.

/8” and ½”), optional

• o-rings (2 for sensor, 2 for harness) and lubricant

• bag containing

/8” NPT barbed adapter fittings (2 ea.

/8” and ½”), pipe

thread tape, and hose clamps (6)

The flow cell may be used without the optional intake and outlet valves.

ASSEMBLY

Assembly of the RDO Flow Cell consists of the following procedures:

A Remove the RDO sensor from the existing adapter plate it ships with

B Install the RDO sensor in the top of the flow cell (RDO adapter plate)

C Prepare the flow cell

↑↑

↑

MP TROLL 9500

RDO Sensor

Assembled flow cell

with MP TROLL 9500

and RDO sensor

OUTFLOW

←←

←INFLOW

page 1 of 4

1 2 3 4

FLOW CELL 1
1 800 446 7488 4

Résumé du contenu

Page 1 - FLOW CELL

Information SheetMulti-ParameterWater Quality TROLL®(over)RDO® FLOW CELLCatalog No. 0057600APPLICATIONDesigned for use during low-flow sampling and w

Page 2

Multi-Parameter Water Quality TROLL®A. REMOVE THE RDO SENSOR FROM THEEXISTING ADAPTER PLATEThe RDO sensor is shipped assembled in an adapter plate (or

Page 3

Multi-Parameter Water Quality TROLL®page 3 of 43. Insert the RDO sensor (cable first) into the center hole ofthe adapter plate, on the side opposite t

Page 4 - 1 800 446 7488

Multi-Parameter Water Quality TROLL®1 800 446 7488(toll-free, US and Canada) or 970 498 1500 www.in-situ.comDue to continuing product development

Commentaires sur ces manuels

Pas de commentaire

In-situ Flow Cell for Low-Flow System with RDO Sensor (pur Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour l'eau In-situ Flow Cell for Low-Flow System with RDO Sensor (pur. In-Situ Flow Cell for Low-Flow System with RDO Sensor (purchased before 09/2008) User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour l'eau In-situ Flow Cell for Low-Flow System with RDO Sensor (pur