In-situ Level TROLL 400/500/700/700H Quick Start Guide Manuel d'utilisateur télécharger pdf (Page 4)

Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO, RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.

l All data

l New data (data logged since the last download)

l Time interval to download

New data is downloaded by default to a new

log file. To append new data to the last

download of this log, be sure the option

"Append logs on download" is selected in the

General Settings dialog (Preferences >

General Settings).

2. The log is copied to the connected PC into your Win-Situ

working directory folder. View or change the working

directory using File > Settings.

3. At the end of the download, Win-Situ gives you the

option of viewing the data.

Select Yes and the log is displayed in the Data

screen.

Select No and the Logging screen appears. You

can view the data at any time by selecting it in the

Data tab.

Win-Situ Mobile Software

Use Win-Situ Mobile with a RuggedReader Handheld PC

and Aqua TROLL, Level TROLL, and Rugged TROLL

Instruments. Training videos are available on the In-Situ

Inc. website www.in-situ.com under Tech Resources.

Connect an Instrument to the Rugged Reader

Serial Port

1. Rugged Reader

2. Communication Cable

3. RuggedCable System

4. In-Situ instrument

Connect to the Software

With an instrument connected, tap the Start button on the

RuggedReader. Tap Win-Situ Mobile. Tap the Connect

button, and tap the check mark.

Set up a Data Site

1. Tap the Sites button. Select an existing site or tap the

New button to create a new site.

2. Enter information on the subsequent screens and

continue by tapping the right arrow button. Tap the

check mark button when finished.

Set up a Data Log

1. Tap the View menu and select Logging.

2. Tap the More button, and then tap the New button.

3. Add the log name and tap the right arrow button.

4. Select the parameters you want.

5. Rearrange parameter order if desired. Tap Edit to

change units.

6. Select a logging method appropriate for your

deployment.

7. Configure the logging method.

8. Select a start condition.

When an instrument is deployed on a wire,

rather than a cable, you will not be able to

communicate with it after installation. Select a

Scheduled start if you are deploying the

instrument on a wire.

9. Select log wrap condition.

10. Select a level reference type.

11. Enter a specific gravity value for the deployment.

12. Configure the level reference. Your instrument MUST be

installed in its final location to set the level reference

correctly. If you are setting up a data log before installing

your instrument in its final location, you will need to select

either “Set First Logged Reading To” or “Remind Me to

Set Reference Later".

Select “Set First Logged Reading To” if you are

using a scheduled start, or “Remind Me to Set

Reference Later” if you are using a manual

start and are NOT deploying the instrument on

a wire.

13. The software displays a summary. Look over your

selections carefully before clicking the check mark.

14. Start the log. A Scheduled Start log will start

automatically at its programmed time. To start a Manual

log, go to the Logging tab, highlight the log name, and

tap the Start button.

View or Download the Log

1. To download data, tap the Logging tab, and tap the

Download button. Select the desired download options

and tap the check mark when finished.

2. To view the data, tap the View button. Use the View

drop-down menu to select the data channel you want to

view. Select the date and time interval you want and tap

the check mark.

Stop a Log

After you stop a log you cannot restart it.

1. To permanently stop a log that has no scheduled stop,

go to the Logging tab, and select the log.

2. Tap the More button, and then tap the Stop button.

3. Make sure that you download the data after you stop a

log.

Drop the Connection and Exit Win-Situ Mobile

Software

Prior to physically disconnecting the RuggedReader from

the communication cable, tap the Connect button. The

button changes from blue to yellow and appears

disconnected.

To exit Win-Situ Mobile Software, tap the File menu and

select Exit.

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

In-situ Level TROLL 400/500/700/700H Quick Start Guide Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour l'eau In-situ Level TROLL 400/500/700/700H Quick Start Guide