In-situ Outboard Desiccant for Use with Stripped and Tinne Manuel d'utilisateur télécharger pdf

Information Sheet

Due to continuing product development this information is subject to change without notice. In-Situ and the In-Situ logo, Win-Situ, TROLL, BaroTROLL,

1 800 446 7488

(toll-free, US and Canada) or 970 498 1500 www.in-situ.com

Level

TROLL

Accessories

Aqua

TROLL

Accessories

Catalog No. 0051380

DESCRIPTION

A clear acrylic tube with replaceable indicating desiccant, designed to attach to the

vent tube of vented RuggedCable™ stripped and tinned. Protects the device's cable

and electronics from condensation of water vapor in high-humidity environments.

The desiccant gradually turns from blue to pink as it becomes saturated with

moisture.

Material Clear acrylic, nylon, HDPE membrane

(high density polyethylene)

Environmental rating Weatherproof, not designed for submersion

Size 3.2 cm (1.25 in) O.D., 11.4 cm (4.5 in) long

Desiccant approx. 22 g silica gel, type 4

INSTALLATION

1. Snip off the knot at the bottom of the vent tube extension.

2. Attach the vent tube extension firmly to the cable vent tube. Cover at least a

quarter-inch of the cable vent tube for a secure attachment.

3. Use the attached hook-and-loop strap to secure the desiccant to the cable,

below the stripped wires, as shown in the lower photo at left.

4. Remove the red dust cap from the desiccant pack to allow air to reach the cable's vent

tube.

GUIDELINES & PRECAUTIONS

• Desiccant will absorb moisture from the top down and for best results should be

replaced before the entire volume has turned pink. Desiccant refill kits, Cat. No.

0029140, are available from In-Situ Inc. or your distributor.

• Protect new desiccant from moisture until ready to use. The supplied dust cap

and the knot in the vent tube help to keep the desiccant dry.

• Be sure to remove the dust cap before deployment to allow air to reach the cable's

vent tube.

OUTBOARD DESICCANT

PACK

Dust cap—remove

before use

Vented cap with

hydrophobic

membrane

Vent tube extension

Knot

and

secured to

cable with

strap

Outboard

desiccant

attached to

cable vent

tube

0051382 rev. 002 10/06

OUTBOARD DESICCANT 1

Résumé du contenu

Page 1 - OUTBOARD DESICCANT

Information SheetDue to continuing product development this information is subject to change without notice. In-Situ and the In-Situ logo, Win-Situ, T

Commentaires sur ces manuels

Pas de commentaire

In-situ Outboard Desiccant for Use with Stripped and Tinne Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour l'eau In-situ Outboard Desiccant for Use with Stripped and Tinne. In-Situ Outboard Desiccant for Use with Stripped and Tinned RuggedCable Systems User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour l'eau In-situ Outboard Desiccant for Use with Stripped and Tinne