In-situ smarTROLL RDO Handheld Operators Manual Manuel d'utilisateur

Operator's ManualSMARTROLL™ RDO Handheld InstrumentInformation subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HE

10Instrument OverviewInstrument DescriptionThe SmarTROLL™ RDO Handheld Instrument is comprised of a mobile display, batterypack, cable, and an integra

11Probe Dimensions with Restrictor OnTotal length with connector 167.54 mm (6.60 in.)Total length without connector 154.84 mm (6.10 in.)Restrictor len

12System SetupYou will need to install batteries in the battery pack, install the RDO Sensor Cap on theprobe, and attach the cable.Install the Batteri

134. Close the cover and slide the lever to lock the compartment.Installing the Sensor and Cable1. Twist the restrictor off the probe.2. Remove the du

148. Make sure the batteries are in the battery pack.9. Align the pins on the cable with the pins on the battery pack, then twist the outerportion of

15Connect the Instrument to the iSitu App1. Make sure that the cable is connected to the instrument and the battery pack.2. Press the power button on

16If you allow iSitu to use your current locations it will enable themapping feature for site setup. If you select Don't Allow, you canchange the

17Live Readings ScreenThe Live Readings screen is also referred to as the Home screen. If you touch theHome icon within the app you will return here.L

18Change Parameters and Units1. From the Home screen, tap any parameter field.2. Swipe the left side of the parameter pick wheel to find the appropria

19Create a New Site1. From the Live Readings screen, tap the Sites button.2. A list of existing sites appears.3. Tap the New Site button. The Site Det

2Copyright © 2013 by In-Situ Inc. All rights reserved.This document contains proprietary information which is protected by copyright. No partof this d

204. Tap the Name field. Type the name for the new site and tap Return.5. To add a description, tap the Description field. Type a description and tap

213. Tap the Set button. The site will appear on the Live Readings screen and recordeddata will be associated with the selected site.Edit a Site1. Tap

224. Tap the site you intend to restore.5. Tap the Restore button.iSitu DataAbout DataiSitu allows you to view real-time readings, record readings in

23Record Data1. Tap the Record button on the Live Readings screen to record data. The number onthe stopwatch icon represents how many 10-second data i

24View an Individual ReadingRecorded data is stored on the Apple device in a comma-separated value (CSV) fileand can be viewed in a spreadsheet format

253. The most recent data in the last ten-second interval appears. Tap the Home icon toreturn to the Live Readings screen or tap the Envelope icon to

26View and Email Data from the Selected SiteAfter you have recorded data, you can email the data as a CSV file that can be openedwith common spreadshe

273. To select all logs in the list, tap the All/None button, or to select individual logs, tapthem separately.4. Tap the Envelope icon.5. An email fo

286. Enter an email address in the To: field.7. Tap the Send button.You can also transfer data to a computer using iTunes.

29View, Email, or Delete Data from Any SiteAfter you have recorded data, you can email the data as a CSV file that can be openedwith common spreadshee

3Table of Contents1 Introduction5Scope 5Serial Number Location 52 Safety53 General Specifications64 Sensor Specifications7Dissolved Oxygen RDO Fast Ca

303. Tap the View button.4. The list of logs associated with that site appears. Tap the log you want to view. Theselection circle turns red and the Vi

31Emailing Data From Different Screens in iSituEmailing from the Data screenSelect one or more sites and email all logs associated with the selected s

32Delete all Logs by Site1. Tap the Data icon.2. Tap the All/None button, or tap an individual site. The selection circle turns redwhen a site is sele

33iSitu CalibrationAbout CalibrationTap the Calibration icon in the iSitu App to access a list of methods by which tocalibrate the RDO sensor.Note tha

343. Place a water-saturated sponge in the bottom of the calibration cup. Place theinstrument into the calibration cup, and tap Start.The calibration

355. Remove the sponge and add fresh sodium sulfite solution to the fill line. Place theinstrument into the calibration cup, and tap Start.Do not allo

367. To view the calibration report, tap View Report.8. Rinse the sensors thoroughly with DI water.

37Care and MaintenanceMaintenance ScheduleFor best results, send the instrument to the manufacturer for factory calibration every 12to 18 months.User-

384. If extensive fouling or mineral build-up is present, soak the RDO Cap end (while thecap is still installed on the sensor) in commercially availab

4View an Individual Reading 24View and Email Data from the Selected Site 26View, Email, or Delete Data from Any Site 29Emailing Data From Different Sc

5IntroductionThis manual is intended to describe the characteristics, operation, calibration, andmaintenance of the SmarTROLL™ RDO Handheld Instrument

6General SpecificationsOperatingtemperature-5 to 50° C (23 to 122° F)Storagetemperature-40 to 65° C (-40 to 149° F)Diameter2.61 cm (1.03 in.)2.84 cm (

7Sensor SpecificationsDissolved Oxygen RDO Fast Cap (Optical Sensor) SpecificationsAccuracy ±0.1 mg/L; ±0.2 mg/L; ±10% of readingRange0 to 8 mg/L; 8 t

8Barometric Pressure Sensor Specifications (Battery Pack)Accuracy ±3 mbar max.Range 300 to 1100 mbarResolution 0.01 mbarSensor Type FixedResponseTimeI

9Battery Pack SpecificationsBattery Type Four 1.5V AA lithium or alkaline batteriesOperatingtemperature-5 to 50° C (23 to 122° F); 95% relative humidi